Storage

OUTDOOR STORAGE AND HEAVY GOODS HALLS WITH INDOOR CRANE

We have the right warehouse for every good. Customers throughout Switzerland can book available storage space with us. All our storage areas are equipped with the latest technology and special equipment. EMIL EGGER is THE storage specialist for the storage of heavy cargo, machines, railroad wagons or generally oversized goods.

PROFESSIONAL AND SAFE STORAGE OF HEAVY AND LARGE GOODS

Unsere eigenen und spezifisch für Schwergüter ausgelegten Lagerhäuser sind in der ganzen Schweiz verteilt und somit immer in Ihrer Nähe. Insgesamt stehen nur schon für Schwergüter über 40‘000 m² Lagerfläche zur Verfügung. Damit ist ETE auch im Lagerbereich der leistungsfähigste Logistiker im Land.

Zusammen mit den weiteren Palettenlagern bietet EMIL EGGER AG Flächen von rund 200‘000 m². Hohe Bodenbelastungen und Hallenkrananlagen bis über 60 t sind Standard. Sämtliche Lagerhallen sind nach neusten Normen gebaut und bei Bedarf auch geheizt. Ebenso verfügt ETE über grosszügige Aussenlager.

Zusätzlich lässt die Flexibilität der EMIL EGGER Lagerinfrastruktur den Kunden grösstmöglichen Spielraum und spart Kosten. Unsere Kunden bezahlen immer nur soviel Lagerfläche, wie sie tatsächlich benötigen. Bedarfsorientiert können sie kurz-, mittel- oder langfristig mieten.

Wir schaffen mit unseren Services Freiraum für unsere Kunden und spielen ihre Ressourcen frei für das Kerngeschäft.
Unsere Spezialfahrzeuge übernehmen zudem auf Wunsch den An- bzw. Abtransport von Gütern wie Maschinen, Anlagen, Transformatoren, Kabelrollen, Containern etc.

HEAVY GOODS STORAGE AREA IN M²
40,000
Mobile cranes
37
CRAWLER CRANES
10
emil-egger-ag-michael-dudler-geschaeftsleitung-bereichsleiter-schwergut

STORAGE SPECIALIST FOR OVERSIZED CARGO

PROFESSIONAL STORAGE ON REQUEST INCLUDING TRANSPORT

“Our heavy lift warehouses are conveniently located and have the necessary infrastructures and trained personnel to carry out storage in a professional as well as safe manner. Upon request, we also provide round-trip transportation or transportation to the destination.”

Michael Dudler
Division Manager Heavy Lift Logistics, Member of the Executive Board

THE NUMBER 1 IN HEAVY LIFT LOGISTICS IN SWITZERLAND

Our goal: Your recommendation
emil-egger-1000-tonnen-lr-11000-raupenkran-unterfuehrung-einhub-8
SBB Pfungen station
Last weekend, the ETE employees performed an extraordinary feat. The starting signal for the operation was given on Friday morning at 4:00 am. At Pfungen railway station, we were able to move a pre-concreted pedestrian subway including the associated stair and ramp elements up to 170 t with our 1000 t Liebherr LR 11000 crawler crane.
Learn more
emil-egger-spezialtransporte-kranarbeiten-platzierung-unterfuehrung-schwergut-logistik-6
190 TONS OF RAILWAY SUBWAY PLACED
The LR 11000 was erected for the placement of a 190-tonne passenger subway at Martigny railway station in the Valais. The parts of the giant crane were delivered with 25 tugs and assembled with a mobile crane.
Learn more
emil-egger-spezialtransporte-tiefbettauflieger-modul-bau-kranmontage-3
284 MODULES TRANSPORTED AND PLACED BY CRANE
On behalf of Burckhardt Compression AG, Winterthur, we were allowed to lift a 280 t compressor from the production site in Winterthur with our 500 t lifting system, move it and then load it onto our 18-axle special low-loader. With a total weight of more than 420 t and a total length of almost 60 m, including the two impact vehicles, we then drove along cantonal roads in the direction of Auhafen/Basel.
Learn more
emil-egger-spezialtransport-maschinentransport-kompressor-industrieumzug-logistik-2s
Industrial relocation with special transport
On behalf of Burckhardt Compression AG, Winterthur, we were allowed to lift a 280 t compressor from the production site in Winterthur with our 500 t lifting system, move it and then load it onto our 18-axle special low-loader. With a total weight of more than 420 t and a total length of almost 60 m, including the two impact vehicles, we then drove along cantonal roads in the direction of Auhafen/Basel.
Learn more
emil-egger-bergung-zugunglueck-bahnwagen-schweiz-bern
Recovery after train accident
At the end of March, a violent storm blew a three-car train composition off the tracks in Lüscherz, Bern. Of the 16 passengers on the train at the time, three were injured. Fortunately, there were no serious injuries. EMIL EGGER AG was entrusted with the rescue.
Learn more
emil-egger-crane-work-moving-railway-bridge
Replacement beaver bridge in Biberbrugg with 1000 tons crane
Numerous onlookers followed the work of replacing the 60-year-old beaver bridge in Biberbrugg from September 30 to October 2. Toneatti AG, together with subcontractors such as EMIL EGGER, carried out the long-planned work. After dismantling the old bridge, the new one, 17 m long and weighing 240 tons, was then set with millimeter precision.
Learn more
Crane assembly EMIL EGGER | Power pole assembly in Pradella - La Punt project
Crane work for power pole assembly
Several cranes from the EMIL EGGER fleet were deployed in the Engadine to ensure smooth assembly: an 80-ton crane, a 100-ton pneu crane and, in some cases, a 250-ton mobile crane with a hook height of over 90 meters.
Learn more
emil-egger-tadano-duebendorf-heavy-lift-logistics-crane-work
All-terrain crane Tadano AC 7.450-1 Operation in Dübendorf
Tadano AC 7.450-1 mobile crane in operation on a high-rise construction site in Dübendorf. Due to the confined space, a compactly built crane with enormous lifting height was required, which can erect construction cranes up to 100 m.
Learn more
emil-egger-pneu-crane-450-tonne-wood-element-view-tower-hardwald-kloten-22
42 m high observation tower was completed in three strokes
The wood used for the construction of the tower comes directly from the hardwood forest. Approximately 310 cubic meters of wood were processed. The whole tower weighs a total of 190 tons. The challenge of stacking the weighty and large prefabricated elements of 42 tons each on top of each other was solved by means of crane work by EMIL EGGER AG. The modules were mounted on top of each other in three lifts up to a height of 42 m by means of a 450-tonne pneumatic crane.
Learn more
EMIL EGGER Mini caterpillar crane C6 on the Säntis
When the smallest is suddenly the highest
In the spring of 2022, our smallest C6 mini crawler crane had a big job on the landmark of eastern Switzerland – the Säntis – at an altitude of over 2500 metres. Various crane jobs had to be carried out as part of a research project.
Learn more