before 2 years | EMIL EGGER AG

Construction of infrastructures for renewable energies by EMIL EGGER

Filling station of the future by kvyreen

Especially in the field of renewable energy, EMIL EGGER is a reliable partner when it comes to logistical support in setting up infrastructures. With our professional and high-performance general cargo and heavy lift logistics, these plants can only be put into operation. So too kvyreen (Quirin): The gas station of the future. Battery electric vehicles can thus be charged immediately with guaranteed renewable energy. The Swiss company H2 Energy integrated all the technology in a closed cube. Via a fuel cell, an inverter and a charging station, the green hydrogen is made available for fast charging.
EMIL EGGER is a reliable partner for the development of infrastructures for renewable energies
EMIL EGGER is a reliable partner for the development of infrastructures for renewable energies

The location-independent solution, which does not burden the local power grid, is currently located at Oberstrasse 141 in St. Gallen. The test phase will be accompanied by a scientific study conducted by Empa. The Federal Office of Energy supports innovation. H2 Energie is cooperating with Avia Osterwalder St. Gallen and ABB Switzerland.

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

EMIL EGGER is a reliable partner for the development of infrastructures for renewable energies

More news from Emil Egger

emil-egger-spezialtransporte-tiefbettauflieger-modul-bau-kranmontage-3

284 MODULES TRANSPORTED AND PLACED BY CRANE

On behalf of Burckhardt Compression AG, Winterthur, we were allowed to lift a 280 t compressor from the production site in Winterthur with our 500 t lifting system, move it and then load it onto our 18-axle special low-loader. With a total weight of more than 420 t and a total length of almost 60 m, including the two impact vehicles, we then drove along cantonal roads in the direction of Auhafen/Basel.
Learn more
emil-egger-spezialtransport-maschinentransport-kompressor-industrieumzug-logistik-2s

Industrial relocation with special transport

On behalf of Burckhardt Compression AG, Winterthur, we were allowed to lift a 280 t compressor from the production site in Winterthur with our 500 t lifting system, move it and then load it onto our 18-axle special low-loader. With a total weight of more than 420 t and a total length of almost 60 m, including the two impact vehicles, we then drove along cantonal roads in the direction of Auhafen/Basel.
Learn more
emil-egger-bergung-zugunglueck-bahnwagen-schweiz-bern

Recovery after train accident

At the end of March, a violent storm blew a three-car train composition off the tracks in Lüscherz, Bern. Of the 16 passengers on the train at the time, three were injured. Fortunately, there were no serious injuries. EMIL EGGER AG was entrusted with the rescue.
Learn more
default

Relocation of HPHT presses for Algordanza

Algordanza AG is the only manufacturer of memorial diamonds worldwide. From the urn ashes of the deceased, a diamond is created that can always be carried with you and is everlasting. The isolation of the carbon, by means of a chemical process is carried out in the Swiss laboratory by experienced laboratory technicians. To enable crystal synthesis, conditions must be created as in the earth’s interior. Diamonds are formed by pressure and high temperatures. This is simulated by HPHT (High Pressure – High Temperature) presses and allows the memory diamonds to be created.
Learn more
emil-egger-ag-auf-innoteq-bern-3

MEETING PLACE FOR THE SWISS MANUFACTURING INDUSTRY

From 7 to 10 March, Bern will be the venue for the Swiss machinery and manufacturing industry. This is also an important moment for EMIL EGGER AG. We can be found with our special electric crane ESK 30 in Hall 2.0 on Stand F01. Our industrial relocation professionals are looking forward to numerous visits.
Learn more
emil-egger-crane-work-moving-railway-bridge

Replacement beaver bridge in Biberbrugg with 1000 tons crane

Numerous onlookers followed the work of replacing the 60-year-old beaver bridge in Biberbrugg from September 30 to October 2. Toneatti AG, together with subcontractors such as EMIL EGGER, carried out the long-planned work. After dismantling the old bridge, the new one, 17 m long and weighing 240 tons, was then set with millimeter precision.
Learn more
Crane assembly EMIL EGGER | Power pole assembly in Pradella - La Punt project

Crane work for power pole assembly

Several cranes from the EMIL EGGER fleet were deployed in the Engadine to ensure smooth assembly: an 80-ton crane, a 100-ton pneu crane and, in some cases, a 250-ton mobile crane with a hook height of over 90 meters.
Learn more
emil-egger-tadano-duebendorf-heavy-lift-logistics-crane-work

All-terrain crane Tadano AC 7.450-1 Operation in Dübendorf

Tadano AC 7.450-1 mobile crane in operation on a high-rise construction site in Dübendorf. Due to the confined space, a compactly built crane with enormous lifting height was required, which can erect construction cranes up to 100 m.
Learn more
default

Derailed railcar put back on tracks thanks to two EGGER cranes

On Sunday, July 17, 2022, a train of the Appenzeller Bahnen derailed in Wasserauen after colliding with a car. To help the railcar back onto the tracks, EMIL EGGER was quickly on the scene with two mobile cranes.
Learn more
emil-egger-pneu-crane-450-tonne-wood-element-view-tower-hardwald-kloten-22

42 m high observation tower was completed in three strokes

The wood used for the construction of the tower comes directly from the hardwood forest. Approximately 310 cubic meters of wood were processed. The whole tower weighs a total of 190 tons. The challenge of stacking the weighty and large prefabricated elements of 42 tons each on top of each other was solved by means of crane work by EMIL EGGER AG. The modules were mounted on top of each other in three lifts up to a height of 42 m by means of a 450-tonne pneumatic crane.
Learn more