before 1 year | EMIL EGGER AG

Complicated recovery operations after train accident

Locomotive crashes into construction train near Bern - EMIL EGGER carries out the removal of the crashed rail vehicles

A locomotive collided with a stationary construction train at Zollikofen station (BE) on Thursday, June 2, 2022. The locomotive driver was slightly injured. No other persons were harmed.
emil-egger-emergency-recovery-accident-logistics-train-car-rail-car-help-hotline-6

Two rail cranes separated the vehicles that were wedged into each other. The complex recovery operation was only possible with the overhead lines switched off.

EMIL EGGER took over the removal of the crashed vehicles. As a specialist in the transport of rail vehicles, the company is the first port of call when it comes to emergency salvage of this kind.

By means of exceptional transport escort and special vehicle, a low-bed trailer and the laying of roadway slabs at critical route points, the rail vehicles could be safely removed.

More news from Emil Egger

emil-egger-logistics-bystronic-laser-ag-case-study-customer-case-study-4268

Cooperation with Bystronic Laser AG

In 2016, Bystronic Laser AG started the cooperation with EMIL EGGER. What began with simple warehouse logistics has developed over the last few years into trained and process-oriented production logistics.
Learn more
default

Derailed railcar put back on tracks thanks to two EGGER cranes

On Sunday, July 17, 2022, a train of the Appenzeller Bahnen derailed in Wasserauen after colliding with a car. To help the railcar back onto the tracks, EMIL EGGER was quickly on the scene with two mobile cranes.
Learn more
Rhaetian Railway replaces three old steel bridges - EMIL EGGER takes over crane work

Replacement of three old RHB steel bridges by ETE crane logistics

Not far from the fashionable spa and resort town of St. Moritz in the Swiss canton of Graubünden, a Liebherr LR 11000 crawler crane has installed a 176-ton railroad bridge. This most powerful crawler crane in Switzerland belongs to the logistics and transport company EMIL EGGER AG and got the job done at an altitude of just under 2,000 meters in the Alps – with an unusual setup configuration due to lack of space. In total, three aged truss bridges of the Rhaetian Railway were replaced by the Liebherr crane.
Learn more
1000 tons crawler crane from EMIL EGGER in operation on Olma construction site in St. Gallen

1000 ton crawler crane in use for highway overlay

EN: Im Herbst 2021 wurde mithilfe des Raupenkrans LR 11000 der EMIL EGGER AG die Autobahn A1 in St. Gallen auf einer Länge von rund 190 Metern überdeckt. EN: Dabei mussten 186 Spannbetonträger mit 85 Tonnen Gewicht und 30 m Länge millimetergenau platziert werden.
Learn more
Disassembly and reassembly of a reworked hydropower turbine

Disassembly and reassembly of a reworked hydropower turbine

Dismantling and reassembly of a reworked hydropower turbine at Matte power station on the River Aare in Bern. EMIL EGGER dismantled the guide vane and the impeller with a total weight of 24 t and brought it from Bern to the ANDRITZ manufacturing plant in Kriens, for a general overhaul. After the overhaul, we transported the turbine back to its place and also took over the assembly with the help of a pneumatic crane.
Learn more
Emergency rescue of a railcar of TPC crashed by an avalanche by EMIL EGGER

Emergency rescue of a railcar from TPC that had been injured by an avalanche

On Wednesday 9.2.2022 in the course of the afternoon, in the Vaud Alps, a railcar of the Villars-sur-Ollon – Bretaye rack railroad was buried by an avalanche and plunged down the slope. Fortunately, except for the driver, there were no persons on board and there were no injuries. Until then, no comparable event had ever occurred on this slope.
Learn more
Assembly of prefabricated modules with mobile crane from EMIL EGGER

Stable construction with mobile construction crane and transport of large wooden trusses

Fascinatingly fast erection of a house for laying hens in Neuenegg. The wooden trusses were delivered via special transports and our mobile construction crane, together with Renggli’s assembly team, ensured the rapid placement of the large components on site.
Learn more
Assembly of EMIL EGGER luffing jib cranes on the Grimsel dam

Grimsel dam – assembly of the luffing jib cranes

At the beginning of this new year, we like to take a look back at the start of the project of the century – the new dam on the Grimsel. The dam is a double-curved arch dam with a volume of about 215,000 cubic meters of concrete. By the end of the 2021 construction season, around 35,000 cubic meters of concrete have been used, which means that around 16 percent of the wall has been built.
Learn more
Assembly of steel and concrete elements for a parking garage with the help of a 250-tonne mobile crane.

Assembly steel structure and concrete elements with 250 tons crawler crane

For the assembly of a parking garage in Wohlen, our team arrived with the smallest powerhouse of the EMIL EGGER crawler crane fleet, the 250 tonner. Steel structure and concrete elements are set at the same time.
Learn more
Precision lift from bridge to abutment with crawler crane from EMIL EGGER

Precision lift of a bridge in Gossau SG with 750 tons crawler crane

In its first operation, the new 750 t crawler crane from EMIL EGGER moved the new bridge onto the prepared abutments in a precision lift that took less than an hour. For the modern powerhouse, the 190 t were a good start to working life. This is the most modern crawler crane in the world. The machine delivered by Liebherr to EMIL EGGER is only the third of this type presented in spring.
Learn more